1. Basic Troubleshooting

Let’s begin with some fundamental troubleshooting steps before we explore more technical solutions.

1. Restart: Power off your system, server, and router. Wait for a minute before powering them back on.
2. Update: Ensure that all relevant software components are updated. This includes Palworld, its server, launcher, system drivers, operating system (OS), or console firmware.
3. Network Type: Set your system’s network type to Private rather than Public.
4. VPN: To eliminate potential network issues, try playing Palworld using a VPN.
5. Frame Rate: Limit the game’s FPS to 60 to see if there’s an improvement.
6. Single Player: Enter a single-player world, perform some simple tasks, then exit to the title screen and attempt to load the problematic world.
7. Hit Ctrl or Roll: If the issue arises after taking a fast travel journey, press Ctrl or Roll to cancel the grapple.
8. Windowed Mode: Launch the game in Windowed Mode instead of full screen.
9. Install an Older Graphic Driver: Sometimes, installing an older graphics driver may resolve compatibility issues with the game.

2. Open as an Administrator and Disable Full Screen Optimization

Lack of administrator privileges or Windows optimizing the game for full screen can result in the game getting stuck on the infinite loading screen. Addressing these two issues can fix the problem.

2.1. Open Launcher as Administrator

1. Right-click on the game launcher (Epic or Steam) and select Run as Administrator.

   

2. Confirm to open the app and then launch Palworld.

2.2. Disable Full Screen Optimization for Palworld

The following steps pertain to Steam:

1. Open the Steam Library and right-click on Palworld.
2. Navigate to Properties > Local Files.
3. Click Browse to access the game’s installation directory.
4. Right-click on Palworld.exe and select Properties.
5. Go to the Compatibility tab and check the following options:

   Disable Full Screen Optimization
   Run as Administrator

   

6. Click Apply and then OK.
7. Launch Palworld and check if the issue with the loading screen is resolved.
8. If the problem continues, use the Compatibility Troubleshooter for the game and see if it resolves the issue.

2.3. For Xbox App

Since the Xbox app cannot launch in administrator mode, use the following steps to execute Palworld as an administrator within the Xbox app.

2.3.1. Run Through the Start Menu

1. Press the Windows button and search for Palworld.
2. Select Palworld using the arrow keys and, in the right panel, click on Run as Administrator.

   

3. Click Yes on the User Account Control (UAC) prompt and check if the game loads correctly.

2.3.2. Create Shortcut of Palworld

1. Launch the Xbox app and select Palworld.
2. Click on the three dots in the top right corner and choose Manage.
3. Select Create Desktop Shortcut and press the Windows + D keys to show the desktop.

   

4. Right-click on the Palworld shortcut and choose Run as Administrator.

3. Edit the Hosts File

If Epic’s online services or IP addresses are blocked in your system’s hosts file, it can prevent Palworld from connecting to its server, and the game may get stuck on the loading screen. To resolve this, you can edit the hosts file to comment out the lines related to Epic, effectively allowing the game to connect.

1. Click on the Windows button and search for Notepad.
2. Right-click on it and choose Run as Administrator.
3. On the User Account Control (UAC) prompt, select Yes, then in Notepad, click on File > Open.
4. In the address bar, enter the following path and press Enter:

   C:\Windows\System32\Drivers\etc\

5. At the bottom-right, change ‘Text Documents (*.txt)’ to All Files (*.*).
6. Select the Hosts file, then add the # symbol in front of the lines related to Epic to comment them out. This will prevent those lines from affecting the game’s connectivity.

   

7. Save the changes and launch Palworld to check if the issue has been resolved.

4. Clear Reserved Space of Palworld on Xbox

The reserved space for the game on Xbox contains important game updates, cache, and other data. If this reserved space has invalid configurations or data, the game may fail to load. Clearing the reserved space for Palworld on Xbox could solve the issue.

1. Access My Games & Apps on the Xbox.
2. Navigate to Games > Palworld > Manage Game > Saved Data.
3. Highlight Reserved Space and press the menu button on your controller.
4. Select Clear Reserved Space. Once done, restart your console.

   

5. Try launching Palworld again to see if it loads properly.

5. Verify the Integrity of the Game Files of Palworld

Palworld may get stuck on the loading screen if some of its crucial files are missing or corrupted. Verifying the integrity of the game files in Palworld can often resolve this problem.

The following steps are specific to Steam users:

1. Go to your Steam Library and right-click on Palworld.
2. Click on Properties > Local Files.
3. Choose Verify Integrity of Game Files and wait for the validation process to complete.

   

4. Restart your system and open Palworld to see if the problem has been fixed.

6. Delete the Xbox Key in the Credential Manager

If the Xbox app on your PC fails to correctly retrieve the game-related key from the Credential Manager, Palworld may not load properly as it cannot communicate with the servers. Deleting the Xbox key in the Credential Manager could resolve this issue.

1. Hit the Start Menu button and type Credential Manager.

   

2. Open it and switch to the Windows Credentials tab.
3. Find and expand the XblGrts|DeviceKey entry and click Remove.

   

4. Confirm the removal and restart your PC.
5. Launch the Xbox app and try running Palworld.

7. Use Custom Launch Options for Palworld

If Palworld is failing to launch with its default settings, customizing the launch options might help the game load successfully.

7.1. On Steam or Steam Deck

1. Open Steam and go to the Library section.
2. Right-click on Palworld and select Properties.
3. In the General tab, find the Launch Options textbox and enter the command:

   -ngxdisableota

   

4. Close the properties window and launch Palworld.

7.2. For the Xbox App

1. Create a desktop shortcut for Palworld using the Xbox app, as instructed previously.
2. Right-click the Palworld shortcut on the desktop and choose Properties.
3. Locate the Target textbox and append the following command after the quotation marks (include a space before the dash):

    -ngxdisableota

   

4. Apply the changes and try starting Palworld from the shortcut.

8. Enable and Repair the Required Game Services

If services critical for Palworld are disabled, the game may be unable to get past the loading screen. This can happen when a user tries to manually optimize the system or uses a particular software tool. Enabling these services could address the issue.

8.1. Enable Services

1. Right-click on the taskbar and select Task Manager.
2. Switch to the Services tab and right-click on Xbox Live Auth Manager.

   

3. Select Start, and repeat the same steps to enable the following services:

   Xbox Live Game Save
   Xbox Live Networking Service
   Windows Event Collector
   Parental Control
   Connected User Experiences and Telemetry
   Downloaded Maps Manager
   Connection Manager
   IP Helper
   Gaming Services

4. Once all the necessary services are running, close the Task Manager and try launching Palworld.

8.2. Use the Gaming Services Repair Tool

1. Open your web browser and visit the official Gaming Services Repair Tool page on the Xbox website.

   

2. Download the tool and right-click the downloaded file.
3. Select Run as Administrator and follow the on-screen prompts to complete the repair process.
4. Restart your computer and try running Palworld again.

8.3. Repair Microsoft Store and Its Services

The Microsoft Store is vital for Palworld’s cross-platform authentication on a Windows PC.

1. 1. Press the Windows key and search for Microsoft Store.
   2. Right-click on it and opt for App Settings.

      

   3. Click on Repair and confirm your choice to repair the Microsoft Store.
   4. If needed, select Reset and confirm the reset.
   5. After the repair or reset, open the Microsoft Store, log in, and attempt to launch Palworld.

9. Reinstall Palworld

If Palworld’s installation has become corrupt, due to antivirus interference or a crash, it could prevent the game from loading past the initial screen. Reinstalling Palworld can often resolve such issues.

Before uninstalling, be sure to back up any important data (such as screenshots) and remember that any unsynced progress could be lost.

The steps below illustrate how to uninstall and then reinstall Palworld on Steam. The exact process may vary depending on your gaming platform.

1. In Steam, go to the Library and right-click on Palworld.
2. Select Manage > Uninstall.

   

3. Confirm to uninstall the game. After the uninstallation is complete, restart your system.
4. Reinstall Palworld through Steam and launch it to see if the loading issue has been resolved.

The post How to Fix Palworld Stuck on Loading Screen? appeared first on Appuals.

A possible cause of a black screen while launching Helldivers 2 can include corrupted user configurations, incorrect file permissions that prevent the game from making changes, outdated graphics drivers, and more.

The DirectX version utilized by the game could also lead to this issue on some systems. With various potential causes, this guide will present multiple methods that might help you resolve the black screen issue in Helldivers 2.

Some players have seen success by editing the user_settings.config file to disable fullscreen mode or by setting the game to borderless windowed mode before exiting, both of which have proven effective in avoiding the black screen problem on subsequent launches.

1. Change Helldivers 2 Display Mode

Initially, you should attempt changing the display mode of Helldivers 2. Incorrect display settings can contribute to the black screen issue.

Alter the game’s display mode via the launch options feature in Steam, starting with a forced fullscreen mode and, if needed, switching to windowed mode.

1. Launch the Steam client on your PC.
2. In your Library, right-click on Helldivers 2 and select Properties.

   

3. Next, insert -full into the Launch Options input field.

   

4. Run the game to check whether the black screen issue remains.
5. If the issue persists, replace -full with -windowed and try launching the game again.

   

2. Run Helldivers 2 as an Administrator

Another reason for the black screen could be insufficient privileges for the Helldivers 2 process, which hinders proper access to system resources.

Running the game as an administrator can address this by modifying the properties of the game’s executable file.

1. Start by launching the Steam application.
2. Navigate to the Library and right-click on Helldivers 2.
3. Choose Manage > Browse local files.

   

4. Open the bin folder within the installation directory.
5. Afterward, right-click on helldivers2.exe and select Properties.
6. Move to the Compatibility tab and select the Run this program as an administrator option.

   

7. Click Apply and then OK.
8. Try running the game to see if the black screen still occurs.

3. Force DirectX11

Problems with DirectX12, such as driver issues or incompatibilities with the DirectX12 API, may result in a black screen.

Forcing the game to use DirectX11 can mitigate these issues.

1. Right-click Helldivers 2 in your Steam Library and select Properties.

   

2. Enter –use-d3d11 in the Launch Options field.

   

3. Close the Properties window and start the game.

4. Change Game Data Files Permissions

Incorrect permissions for game files can block changes to data files, leading to a black screen.

Adjusting the permissions of the affected folder could resolve the issue.

1. Launch the Steam application on your computer.
2. Right-click on Helldivers 2 in the Library section.
3. Choose Manage > Browse local files.

   

4. Right-click on the data folder and select Properties.
5. Uncheck the Read-only option in the Properties window.

   

6. Click Apply and choose OK.

5. Verify Helldivers 2 Files

Damaged or corrupted installation files can also cause a black screen issue, as well as missing files from your computer.

Repairing and verifying Helldivers 2 files through the Steam feature can help.

1. Open Steam and right-click on Helldivers 2.
2. Select Properties.

   

3. Go to the Local Files tab.
4. Click on Verify integrity of game files.

   

5. Wait for the scan and repair process to complete.
6. Relaunch the game to check for the black screen.

6. Delete Corrupted User Config

Corruption within Helldivers 2’s local user configuration file can disrupt the game’s functionality, leading to a black screen as this file is required upon every startup.

Remove or rename this file to reset your settings and reconfigure them post-launch.

1. Press the Win key + R to open the Run dialogue.
2. Type in %AppData% and press Enter.

   

3. Navigate to the Arrowhead > Helldivers2 folder.

   

4. Locate the user-settings.config file and either move it to another location or rename it.
5. Launch Helldivers 2 to determine if the black screen continues to appear.

7. Disable Steam Controller Input

The Steam controller input feature may conflict with Helldivers 2, potentially resulting in a black screen.

Disabling this feature through game properties might fix the problem.

1. Open the Steam client.
2. Access the Library, right-click on Helldivers 2, and select Properties.
3. In the Controller tab, choose Disable Steam Input.

   

8. Update Graphics Drivers

Outdated graphics drivers can also lead to the black screen issue because of compatibility issues.

Updating drivers ensures better compatibility with the latest games.

1. Download the Display Driver Uninstaller (DDU) from the official link here.
2. Extract the file and run Display Driver Uninstaller.exe.
3. Choose Continue on the General Options screen.

   

4. Select your GPU type in Select device type.

   

5. Choose your graphics card’s manufacturer.

   

6. Initiate the driver removal by clicking Clean and restart.

   

7. Upon reboot, download and install the latest graphics drivers from your manufacturer’s website.
8. See if Helldivers 2 continues to experience the black screen issue.

9. Change Installation Directory

If the black screen persists, you might need to change the installation directory of the game. This can bypass permissions issues on certain drives.

This requires adding a new Steam Library folder.

1. If you have an additional Steam Library folder, proceed to step 7.
2. Click on Steam at the top left of the client and select Settings.

   

3. Navigate to the Downloads tab.
4. Click on Steam Library Folders and choose Add Library Folder.

   

5. Choose the desired drive for your new Steam Library folder and select Add.
6. Exit the Steam Settings window.
7. In the Library, right-click on Helldivers 2 and pick Properties.
8. Switch to the Local Files tab and select Move install folder.

   

9. Then, choose the newly created Steam Library folder and click Move.
10. Wait for the game to be relocated to the new directory.
11. Launch Helldivers 2 to check if the black screen issue has been resolved.

If the problem continues, consider reaching out to the Helldivers 2 support team for further assistance.

The post How to Fix Helldivers 2 Black Screen Issue appeared first on Appuals.

The most common cause appears to be server connectivity or configuration issues, as the problem often emerges immediately after updates or during peak server load times.

Local network issues or specific settings on a player’s system that interfere with the game’s online features might also contribute to this problem. Some players have found success in overcoming this error by restarting their routers or modifying network settings, which suggests a notable role for network-related issues.

1. Check for Server Outage

The first step is to check for a server outage when you face the aforementioned error message. If the Helldivers 2 servers are overwhelmed by an influx of player connections, they won’t be able to establish new connections.

In such instances, you must wait for the server outage or the overall excess in player connections to diminish. While there is no official platform to verify server outages for Helldivers 2, you can visit the official Helldivers 2 X (formerly Twitter) handle or employ third-party services like DownDetector to check.

2. Switch Network Connection

Switching your network connection could help circumvent the “Failed to create lobby” error message. This is particularly useful if you are connected wirelessly.

Changing your network connection will allow you to establish a link to the Helldivers 2 servers from a different access point, giving your computer a new IP address.

For instance, activate your mobile hotspot if you are on a wired connection, and connect your device to it to test if the error persists. If you are using a wireless connection, try switching to a wired connection and attempt to access the game again.

3. Change DNS Server

The Domain Name System (DNS) server might be behind the error message in Helldivers 2. This can happen if the game’s network request cannot be resolved by your network’s DNS server.

To rectify such issues, consider changing the DNS server settings on your computer. You can opt for free public DNS servers provided by Google or Cloudflare as alternatives.

1. Press the Win key + I to open the Settings app on your keyboard.
2. Navigate to Network and internet > Advanced network settings.

   

3. Expand your network adapter options by clicking the down arrow.

   

4. Select the Edit option under More adapter options.

   

5. Double-click Internet Protocol Version 4 (TCP/IPv4).

   

6. Choose the Use the following DNS server addresses option.
7. Enter the Google or Cloudflare DNS server addresses:

   Google: 8.8.8.8, 8.8.4.4
   Cloudflare: 1.1.1.1, 1.0.0.1

   

8. Click OK.
9. Restart the Steam client and check if the issue has been resolved.

4. Restart Router

Restarting your router can help resolve connectivity issues with Helldivers 2. This action clears the device’s cache and establishes a fresh connection with your Internet Service Provider (ISP).

Renewing your public IP address can help address any IP-related flags on the Helldivers 2 servers. To restart the router, press the Power button on the back or unplug the power adapter and plug it back in after a short wait.

5. Use a VPN Service

Employing a VPN service can potentially resolve connectivity inconsistencies by routing your connection through different servers.

A VPN can help you circumvent regional outages specific to Helldivers 2 by providing you with a new online identity.

There are various reputable VPN services for gaming available. Refer to our comprehensive guide for help selecting the right VPN service for you.

After installing a VPN, connect to its servers to see if the problem has been alleviated.

6. Reset Network Settings

Conflicts within your Windows network settings may prevent Helldivers 2 from establishing a correct connection. This could be due to persistent network adapters or other network configurations.

To address this, reset your network settings in Windows. This action will erase your current network configuration and reinstall any network adapters, allowing you to start afresh.

1. Open the Settings app using the Win key + I shortcut.
2. Proceed to Network and Internet > Advanced Network Settings > Network Reset.

   

3. Click Reset now to commence resetting your network settings.

   

4. Once your PC restarts, verify if the problem has been resolved.

If the issue persists, consider reaching out to the official Helldivers 2 support team for additional assistance.

The post How to Fix “Failed to Create Lobby” Errors in Helldivers 2 appeared first on Appuals.

Additional reports highlight a variety of circumstances leading up to this freeze, including completing a mission and attempting to load back into the ship, only for the game to crash or remain stuck on the loading screen

1.  Toggle your Internet

Disconnecting and then reconnecting to the internet can potentially fix your issue, as it will try to re-establish the connection with your server and possibly fix the issue. If you are using an Ethernet cable, then just unplug it and plug it back again, and if you are using Wi-Fi connectivity, then turn it off and on to see if the loading screen has been completed. You should do it without leaving the game.

PC:

1. Click on the Wi-Fi icon on the bottom right corner of your Windows.
2. Click on Wi-Fi button to turn it off or on.

PlayStation 5:

1. On the top-right side, select the gear icon to open settings.
2. Choose the Network button to open network settings.
3. Go to the Settings tab and toggle the Connect to the internet option.

2. Verify Game Files Integrity

The issue can also be caused if your game files are missing or corrupted. To fix this, you can verify the game files that you have installed, and it will detect if something is missing and automatically download it for you.

This solution is exclusive to PCs; unlike PCs, the PlayStation 5 does not have the option to verify game files. On the PlayStation 5, you might have to wait for an update or reinstall the game.

1. Open Steam Library and locate your game.
2. Right-click on the game and click on the Properties button.
3. Now head to the Installed Files tab and click on Verify integrity of game files button.

3. Turn off your Firewall

Your firewall can also cause the game to get stuck, as it might block connections to the server, ultimately making you stay on the cinematic loading screen. Turning it off can help you fix the connection issue between you and the game server.

1. Click on the Windows Icon on the bottom left and type “Allow an app through Windows Firewall” and press Enter.
2. Click on Change settings button then click on the Allow another app… button.
3. Now click on Network types… button and check both Private and Public options and click on OK.
4. Once done then click on the Browse… button and add your game.

The post How to Solve Helldivers 2 Stuck on Ship Loading Screen? appeared first on Appuals.

This error most commonly occurs due to the game’s inability to recognize a graphics card with at least 4GB of dedicated VRAM and support for DirectX12_0.

Additional factors, such as outdated GPU drivers, insufficient system specifications, or the presence of integrated graphics alongside dedicated GPUs, may also contribute to this issue.

You can overcome the VRAM availability obstacle by increasing the video memory from the BIOS menu. However, if your system does not meet the game’s minimum requirements, you will not be able to bypass the mentioned error message.

1. Check Minimum Game Requirements

The minimum GPU requirement for the game is an NVIDIA GeForce GTX 1060 or AMD Radeon RX 570. If your graphics card is older, the only option to play the game is to update your system.

To find the GPU installed on your computer, use the DirectX Diagnostic Tool:

1. Open the Run dialog by pressing Win key + R on your keyboard.
2. Type dxdiag in the dialog and press Enter.

   

3. The DirectX Diagnostic Tool will launch.
4. Go to the Display tab.

   

5. Your graphics card’s name and manufacturer will be displayed.

2. Update Graphics Drivers

Outdated video drivers can lead to compatibility issues with newer games, such as Marvel’s Guardians of the Galaxy, and may prevent them from running properly.

Therefore, updating the graphics drivers is a crucial step. We also recommend performing a clean install using the Display Driver Uninstaller (DDU) utility to eliminate any underlying inconsistencies.

1. Download Display Driver Uninstaller (DDU) from here.
2. Extract it on your computer and run the Display Driver Uninstaller.exe file.
3. In the DDU, click Continue in the General Options dialog.

   

4. Select GPU in the Select device type menu to load the GPU removal configurations.

   

5. Select the brand of your video card from the Select device menu. Refer to the instructions above to find your manufacturer if you’re unsure.

   

6. Choose the Clean and restart option to uninstall the current video drivers.

   

7. After your computer boots up, visit your video card manufacturer’s website and download the latest drivers available.
8. Install the new drivers and check if the error still occurs in Marvel’s Guardians of the Galaxy.

3. Change Game Launch Options

By changing the game launch options, you can force Marvel’s Guardians of the Galaxy to use Shared VRAM, thereby addressing the missing VRAM requirement.

Shared VRAM allows the graphics card to utilize system memory alongside its dedicated memory, meeting the VRAM demand.

1. Open the Steam application and go to the Library.
2. Right-click on Marvel’s Guardians of the Galaxy and choose Properties.

   

3. Input -sharedvram in the Launch Options field within the Properties window.

   

4. Start the game to see if the issue remains.

4. Increase VRAM

Increasing VRAM may allow Marvel’s Guardians of the Galaxy to run on your system, albeit with a potential performance trade-off. The dedicated video memory inside the GPU provides faster access and is optimized for graphics tasks, leading to better performance.

While adjusting the VRAM allows you to meet the necessary requirements, it may not result in optimal game performance. To modify the VRAM, access the BIOS menu.

1. Restart your computer and enter the BIOS by pressing the dedicated key (commonly F2, DEL, or F10) based on your motherboard’s brand.
2. In the BIOS, move to Advanced Mode by pressing F7.

   

3. Search for the VRAM Graphics settings, which may vary in location depending on the motherboard manufacturer. Typically, it’s located under NB Configuration on ASUS motherboards or Integrated Graphics Devices Configuration on MSI ones.
4. Adjust the VRAM using the VGA Share Memory Size or UMA Frame Buffer Size settings.

   

5. Hit F10 to save the changes and restart your computer.
6. Try launching the game again to check if the error message has been resolved.

If the problem persists, an upgrade to your system specifications will be necessary to resolve it.

The post How to Fix “No Suitable D3D12 Adapter Found” in Marvel’s Guardians of the Galaxy? appeared first on Appuals.

The most common cause identified for this issue revolves around network-related problems, which include server-side issues that prevent a stable connection between the player’s game client and the game servers.

An issue with the nProtect GameGuard anti-cheat system can also prevent the game from establishing a connection with the servers. This guide will take you through various methods that can be helpful in resolving the mentioned error message.

1. Run Steam as an Administrator

The first thing you should do is run the Steam app with administrative privileges. This action resolves any permission conflicts that are causing the error message in Helldivers 2.

The game process will be able to inherit the elevated permissions from the Steam app, which should help to overcome third-party interference.

1. First, completely close the Steam app on your computer.
2. Open the Start Menu and search for Steam.
3. Right-click and select the Run as administrator option.

   

4. Click Yes in the User Account Control dialog box that appears.
5. Launch Helldivers 2 to see if the error persists.

2. Disable Third-Party VPN

Using a third-party VPN connection can lead to issues with the game process connecting to the game server. This issue can result from network inconsistencies with the VPN server to which you are connected.

To resolve the issue, disconnect any active VPN connection before launching the game.

1. Press the Win key + I to open the Settings app.
2. Navigate to the Network and internet > VPN section.

   

3. Select the Disconnect option next to your VPN connection.

3. Allow Helldivers 2 through Windows Firewall

The Windows Firewall might be blocking network requests from the Helldivers 2 process, preventing the game from establishing a connection with its servers.

To address this, you need to add a rule to the Windows Firewall configuration that allows connections from the Helldivers 2 process.

1. Open the Start Menu and search for Firewall and Network Protection. Then, open it.

   

2. Select the Advanced Settings option in the Windows Security app that opens.

   

3. Click the Inbound Rules tab on the left side.
4. In the right pane, click the New Rule option.

   

5. Choose Program and click Next.

   

6. Navigate to the installation directory of Helldivers 2 using the Browse option and select the helldivers2.exe file inside the bin folder.

   

7. Select the Allow the connection option and click Next.

   

8. Proceed to the Profile section by clicking Next.

   

9. Name the rule and click Finish.
10. Repeat the process for the Outbound Rules tab.
11. Restart your computer.
12. Launch Helldivers 2 and check if the error message persists.

4. Delete Helldivers 2 Cache

Helldivers 2 creates a local cache folder in Windows to store various user settings. If there is damage or misconfiguration within the cache files, it can lead to the error message in question. Deleting the game cache is safe and will force the game to generate a new one upon the next startup.

1. Open the Run dialog box by pressing Win key + R.
2. Type %AppData% and press Enter.

   

3. In the File Explorer window, locate and delete the Arrowhead folder.

   

4. Launch Helldivers 2 and check if the connection error persists.

5. Reinstall GameGuard

An inconsistency with the GameGuard anti-cheat software used by Helldivers 2 can also trigger the connection issue. The game requires an active GameGuard connection to process server requests. Reinstalling GameGuard may resolve the problem.

1. Launch the Steam app and navigate to the Library.
2. Right-click Helldivers 2 and select Manage > Browse local files.

   

3. Go to the tools folder and locate the gguninst.exe file. Run it to uninstall GameGuard.
4. Then, launch the game to see if the error message continues.

6. Disable IPv6

IPv6 technology, introduced to accommodate the increasing number of internet devices, can sometimes cause connectivity issues in Windows by interfering with network requests. Disabling this protocol can help.

1. Press Win key + I to open the Settings app.
2. Navigate to Network and Internet > Advanced Network Settings.

   

3. Click the down arrow next to your network adapter.

   

4. Click the Edit button next to More adapter options.

   

5. Deselect the checkbox for Internet Protocol Version 6 (TCP/IPv6).

   

6. Click OK and restart your PC.
7. Check Helldivers 2 for the error message.

7. Change DNS Server

Incorrect DNS resolution of Helldivers 2 requests by your network’s DNS server can also prevent the game from establishing a connection. Changing your DNS server in Windows could help with this issue.

1. Press the Win key + I to open the Settings app.
2. Go to the Network and Internet > Advanced Network Settings section.

   

3. Click the down arrow for additional network adapter options.

   

4. Then, click Edit.

   

5. In the properties, double-click Internet Protocol Version 4 (TCP/IPv4).

   

6. Select Use the following DNS server addresses.
7. Input Cloudflare or Google’s public DNS server addresses:

   Cloudflare: 1.1.1.1, 1.0.0.1
   Google: 8.8.8.8, 8.8.4.4

   

8. Click OK and restart the Steam client.
9. Verify if the error still occurs.

8. Reset Windows Network Settings

Inconsistencies in the Windows network settings can also cause the “Unable to establish a connection to game” error message in Helldivers 2. Resetting the network settings to default can clear any anomalies and allow the game process to connect to the server.

1. Press Win key + I to open the Settings app.
2. Navigate to Network and Internet > Advanced Network Settings > Network Reset.

   

3. Click the Reset now button to begin resetting the network settings.

   

4. After your PC restarts, see if the Helldivers 2 connection issue has been resolved.

9. Perform a Clean Boot

Lastly, if the problem persists after trying the above methods, there’s a chance a third-party app is interfering with Helldivers 2.

Interference from third-party applications is not uncommon, and performing a clean boot can determine if this is the case. A clean boot starts your system with only essential Windows services running on startup.

If the error message disappears during a clean boot, you can identify the problematic app by gradually enabling third-party services one by one.

1. Open the Run dialog box by pressing Win key + R.
2. Type msconfig and press Enter.

   

3. In the System Configuration window, go to the Services tab and select the Hide all Microsoft services checkbox.

   

4. Click Disable all to turn off the third-party services.
5. Click Apply to save your changes.
6. Switch to the Startup tab and click Open Task Manager.

   

7. In the Task Manager, disable third-party apps listed in the Startup tab by selecting them one by one and clicking the Disable button in the bottom right corner.

   

8. Close Task Manager and click OK in the System Configuration window, then restart your computer to perform a clean boot.

If the error message persists, consider contacting the support team at Arrowhead for further assistance.

The post How to Fix “Unable to Establish a Connection to Game” Error in Helldivers 2 appeared first on Appuals.

One prevalent cause linked to these crashes involves the game’s file integrity. Many players have found success in resolving this complication by utilizing Steam’s built-in feature that verifies and repairs game files. This invaluable tool scans for and replaces any files that are corrupted or missing, potentially fixing launch issues.

In addition to file integrity concerns, outdated video card drivers may also trigger compatibility problems that prevent Helldivers 2 from launching correctly. Another potential culprit could be firewall settings that unwittingly block the game’s network connection or prevent its execution. Regularly updating drivers and appropriately configuring firewall settings may help in ensuring a smooth game startup.

1. Run Helldivers 2 as an Admin

One initial step in troubleshooting this issue is to run the game with administrative privileges, which can help overcome any permission conflicts caused by the Windows operating system’s security measures.

1. First, launch the Steam client and navigate to your Library of games.
2. Right-click on Helldivers 2 and select Manage > Browse local files.

   

3. Within the installation directory, proceed to the ‘bin’ folder and right-click on the helldivers2.exe file.
4. Select Properties from the context menu and navigate to the Compatibility tab.
5. Check the Run this program as an administrator box to grant the necessary permissions.

   

6. Click Apply, then OK, and attempt to launch the game through Steam to ascertain whether the issue has been resolved.

2. Clear Steam Download Cache

Steam utilizes a local download cache that could potentially become corrupt, thus preventing the game from launching. Clearing the cache is a harmless procedure that could address this issue.

1. Activate the Steam client on your desktop or laptop.
2. Select the Steam menu in the upper-left corner, then click on Settings.

   

3. Head over to the Downloads section.
4. Choose the Clear Download Cache option, which should clear the stored data.

   

5. Once Steam restarts, test whether the clearing process has led to a successful launch of Helldivers 2.

3. Toggle Steam Cloud Saves

Issues with Steam Cloud saves synchronization may also interfere with the game’s ability to launch properly. Disabling the Steam Cloud Saves feature temporarily could assist in creating a local save file that the game can use instead.

1. Launch the Steam application on your PC and head to the Library section.
2. Right-click on Helldivers 2 to bring up the options menu and select Properties.

   

3. In the game’s properties, disable the Steam Cloud feature to pause cloud syncing while you play.

   

4. After your gaming session, remember to turn the Steam Cloud Saves feature back on to sync your progress.

4. Install Microsoft Visual C++ 2012 Runtime Library

A missing Microsoft Visual C++ runtime library could be a barrier preventing Helldivers 2 from launching, as this software provides essential APIs for game functionality. Make sure the Microsoft Visual C++ 2012 runtime library is installed on your system, as it is particularly crucial for this game.

Download the Microsoft Visual C++ 2012 runtime from the official Microsoft website here and install it on your PC to potentially fix the launch problem.

5. Turn off Steam Controller Input

The Steam controller input feature may also contribute to launch issues for Helldivers 2. It might be beneficial to disable this functionality if it’s interfering with the game’s startup sequence.

1. Access the Steam client and proceed to your Library.
2. Right-click on Helldivers 2 and choose Properties from the menu.

   

3. Select the Controller tab and pick the option to Disable Steam input.

   

6. Disable Third-Party Antivirus

Interference from third-party antivirus programs can sometimes be a reason Helldivers 2 fails to launch, particularly if they stop the anti-cheat program GameGuard from initializing properly.

If the game starts without issue after deactivating your security software, it is recommended to add the GameGuard folder (in the Helldivers 2 bin directory) to the antivirus program’s whitelist to avoid future problems. Don’t forget to add the helldivers2.exe file to the security program’s exclusion list too.

7. Turn off VPN

Using a VPN can also contribute to Helldivers 2’s failure to launch, as it may affect the stability of your network connection, which the game relies on.

1. Go to the Settings app by pressing Win key + I.
2. Navigate to Network and Internet > VPN.

   

3. Utilize the Disconnect option to revert to your regular network connection and test whether Helldivers 2 launches without the VPN.

8. Clean Boot Computer

Clean booting your computer can provide a fresh operating environment, free of interference from third-party services, which may resolve persistent launch issues with Helldivers 2.

1. Press Win key + R, type msconfig, and hit Enter.

   

2. Switch to the Services tab and select the Hide all Microsoft services checkbox to filter the services list.

   

3. Click Disable all to prevent non-Microsoft services from starting up, ensuring a minimalistic boot environment.
4. Save these new settings and proceed to the Startup tab, where you’ll find a link to Open Task Manager.

   

5. Within Task Manager, examine the list of third-party applications and selectively disable those that could be causing conflicts by clicking Disable.

   

6. Reboot your computer to implement the clean boot and monitor whether this impacts Helldivers 2’s ability to launch properly.

The post How to Fix Helldivers 2 Not Launching on Your PC appeared first on Appuals.

The problem may stem from various sources, such as VOIP (voice over internet protocol) during voice calls, instant messaging, receiving messages, or mentions, which cause Discord to process animations in the background, leading to high CPU usage.

This article provides guidance on how to mitigate Discord’s CPU consumption while it operates in the background.

1. Disable Hardware Acceleration

Hardware acceleration allows Discord to utilize your GPU to operate smoothly in the background, but this can also increase CPU load and cause spikes in usage. Turning off hardware acceleration can prevent Discord from excessively running in the background.

1. Open Discord’s User Settings.
   
2. Navigate to Appearance and switch off Hardware Acceleration.
   
3. In the confirmation prompt, click Okay to apply the changes.
   

2. Disable Discord Overlay

Discord’s overlay allows users to interact on the platform without having to leave the game interface. However, this feature requires resources, potentially leading to high CPU usage. Disabling the overlay may rectify the issue.

1. Again, go to Discord’s User Settings.
2. Select Overlay on the left panel and disable Enable in-game overlay.

   

3. Disable Voice Processing Features

Discord enhances voice chat with features like noise suppression and echo cancellation. While they improve voice quality, they also consume considerable CPU resources. Disabling these features may lessen CPU load.

1. Go to Discord’s Voice & Video settings.
2. Disable the following options:
   • OpenH264 Video Codec provided by Cisco Systems, Inc.
   • Hardware Acceleration
   • Echo Cancellation
   • Noise Suppression
   • Automatic Gain Control
   • Advanced Voice Activity

   

3. Restart the Discord application to effect changes.

4. Enable Reduced Motion

The Reduced Motion setting curtails animations within the Discord app to conserve memory and CPU usage. Activating this feature may help to decrease CPU usage.

1. Access Discord’s Accessibility settings.
2. Toggle the switch for Reduce Motion to the “on” position.
   

5. Reinstall Discord

If none of the previous solutions resolve the high CPU usage, the issue could lie with the installation files of Discord. In this case, it is advisable to uninstall the application and install a fresh copy.

1. Press Windows + R, type appwiz.cpl, and hit Enter.

   

2. Locate Discord in the list, select it, then click Uninstall.
   
3. Follow the instructions to remove the application from your system.
4. After uninstallation, visit the official Discord website, download, and reinstall the application.

By following these steps, you should be able to alleviate high CPU usage issues with Discord. Additional strategies include ensuring your drivers are up to date, closing unnecessary applications running concurrently with Discord, and regularly checking for Discord updates that may provide performance enhancements and bug fixes.

The post How to Fix Discord’s High CPU Usage Problem? appeared first on Appuals.

Such issues can cause the game to crash at random moments, creating a less than ideal gaming experience. Below, we’ll outline several solutions you can attempt to eliminate these crashes on your computer.

1. Run Steam as an Admin

Giving the Steam client administrative privileges is the first step you should take. Elevated permissions may resolve any potential permission conflicts within your Windows environment that could contribute to the game’s crashing.

1. Completely exit the Steam client.
2. Open the Start Menu and search for Steam.
3. Right-click on Steam and select Run as administrator.

   

4. Confirm your action in the User Account Control prompt.
5. Launch the game to test for crashes.

2. Disable Steam Controller Input

Steam’s controller input feature allows the use of a controller with any Steam game, but it can lead to crashes due to conflicts or inconsistencies. Disabling this feature might solve the problem:

1. Open your Steam client.
2. Navigate to the Library section, right-click on Helldivers 2, and select Properties.

   

3. In the Controller tab, choose to Disable Steam Input.

   

3. Run Helldivers 2 in Compatibility Mode

Running Helldivers 2 in compatibility mode can address issues on older hardware by deactivating certain more recent features:

1. Launch the Steam client.
2. In the Library, right-click Helldivers 2 and navigate to Manage > Browse local files.

   

3. Locate the helldivers2.exe file within the bin folder, right-click it, and navigate to the Compatibility tab.
4. Select the Run this program in compatibility mode for option, choose an operating system, then click Apply and OK.
5. Test the game for crashes.

4. Reinstall GameGuard

Helldivers 2 utilizes the nProtect GameGuard anti-cheat software, which, if malfunctioning, may be the cause of your game crashing.

1. Within the Steam client in the Library, right-click Helldivers 2 and choose Manage > Browse local files once more.

   

2. In the bin directory, find and delete the GameGuard folder.
3. Right-click the helldivers2.exe and select Run as administrator. This will prompt Steam to re-download GameGuard.

   

4. Launch the game to see if the crashes persist.

5. Delete Corrupted User Config

A corrupted local config file can cause crashes as it’s loaded at the game’s startup. Deleting the damaged file will force the game to recreate a fresh one, albeit at the expense of resetting your user settings:

1. Open the Run dialog by pressing Win key + R and input %appdata%, then hit Enter.

   

2. Find your way to the Arrowhead > Helldivers 2 directory.

   

3. Eradicate the user-settings.config file or move it to a different location. This action will trigger the game to generate a new config file.
4. Test the game for further crashes.

6. Whitelist Helldivers 2

Security software might block game files, leading to crashes, especially concerning the anti-cheat GameGuard program. To mitigate this, whitelist Helldivers 2 and its components in your antivirus software. After adding the exemptions, observe if the crashes continue.

Each antivirus have a different exception process, but you can check our detailed guide on “How to add exceptions in Avast antivirus?“.

7. Update AMD Chipset Driver (if applicable)

Outdated chipset drivers can cause compatibility issues that may lead to crashes. To avoid this, update your chipset driver following these steps:

1. Download the latest chipset drivers for your system from the official AMD website.

   

2. Execute the downloaded chipset driver installer and allow it to complete its task.
3. Subsequently, your computer will restart. Determine if this rectifies the crashing issue with Helldivers 2.

8. Repair Helldivers 2 Game Files

Damaged or missing game files could also be the reason for crashes. To ensure that the game files are in good order, make use of the “verify integrity of game files” feature on Steam.

1. Access the Library section of your Steam client.
2. Right-click Helldivers 2, then select Properties.

   

3. Head to the Local Files tab and click on the Verify integrity of game files… button.

   

4. Wait until the verification process is done, and afterward check if the game still experiences crashes.

9. Update Graphics Drivers

Out-of-date graphics drivers can be another cause behind frequent crashes in Helldivers 2. Updating these drivers could provide needed fixes for issues encountered with newer games.

1. Initially, download the Display Driver Uninstaller (DDU) tool from its official website and extract it to your computer.
2. Open the Display Driver Uninstaller.exe file, then click Continue on the Options screen.

   

3. Select GPU from the Select device type menu.

   

4. Pick your graphics card’s brand from the Select device dropdown.

   

5. Proceed with the Clean and restart option.

   

6. After your computer restarts, go to the graphics card manufacturer’s website and download the latest drivers for your card.
7. Install the newly downloaded drivers and check if Helldivers 2 crashes have been resolved.

10. Update BIOS

BIOS updates are essential for the seamless operation of your system and can enhance stability, potentially reducing game crashes.

1. Press Win key + R, type in msinfo32, and press Enter to access system information.

   

2. Note the BaseBoard Manufacturer and BaseBoard Product to determine your motherboard’s make and model.

   

Using these details, visit the support page for your motherboard and download the most recent BIOS version. You can find instructions for updating your BIOS on your motherboard manufacturer’s website.

11. Remove Overclocking

Last but not least, should none of the previous solutions work, consider removing any overclock settings applied to your hardware. This includes memory profiles such as XMP/DOCP in BIOS and any CPU overclocks like Precision Boost Overdrive for AMD processors.

These overclock settings might cause system instability, leading to game crashes. Check if deactivating the overclock resolves the issue.

The methods listed above should significantly reduce the likelihood of Helldivers 2 crashes. If you continue to face problems, it’s advisable to contact the Helldivers 2 support team for further assistance.

The post How to Prevent Helldivers 2 from Crashing on Your PC appeared first on Appuals.

To eliminate it, you may resort to editing the Windows Registry or using alternative methods. Follow the steps outlined in this guide to remove the icon.

1. Turn off Windows Spotlight

To remove the ‘Learn About This Picture’ icon, you can disable the Windows Spotlight theme. This action will stop the daily Windows Spotlight image from displaying on your PC, and as a result, the icon will be removed.

If you prefer not to disable the Spotlight theme, proceed to the next method.

1. First, use the Win + I keys on your keyboard to open the Settings app.
2. In the Settings app, go to the Personalization > Background section.

   

3. Use the Personalize your background dropdown to select an option other than Windows Spotlight.

   

4. Select the Picture option or a slideshow if desired.
5. Next, navigate to the Personalization > Lock Screen section.

   

6. Finally, change the setting from Windows Spotlight in the Personalize your lock screen dropdown menu.

2. Remove Windows Spotlight via Registry

Alternatively, adjusting the Windows Registry can remove the ‘Learn About This Picture’ icon. This requires creating a new registry key to hide the icon.

Editing the Windows Registry is a sensitive operation. If you feel uncomfortable with this process, consider using a third-party application instead.

1. Open the Start Menu and search for Command Prompt.
2. Right-click on it and select Run as administrator to open an elevated Command Prompt window.

   

3. Copy and paste the following command into the Command Prompt window:

   REG ADD HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {2cc5ca98-6485-489a-920e-b3e88a6ccce3} /t REG_DWORD /d 1

   

4. Restart your computer to apply the changes.
5. The icon for ‘Learn About This Picture’ should now be absent from your desktop.

3. Use ExplorerPatcher

Third-party applications such as ExplorerPatcher offer more convenient ways to customize Windows. This open-source program, available on GitHub, allows you to remove the ‘Learn About This Picture’ icon, along with other modifications.

Download ExplorerPatcher safely from the official GitHub repository here.

1. Download the latest version of ExplorerPatcher using the official download link.
2. You can also access the GitHub repository to download the setup file.
3. Run the downloaded setup file to install ExplorerPatcher.
4. The taskbar may flash or refresh as ExplorerPatcher installs.
5. Next, right-click the taskbar and choose Properties.

   

6. From the menu on the left, select Spotlight.
7. Toggle the option Hide the “Learn about this picture” icon to hide the icon.

   

8. A checkmark will appear next to the option when it is enabled.

By following these methods, you can easily remove the ‘Learn About This Picture’ icon in Windows.

The post How to Remove Learn About This Picture Icon in Windows? appeared first on Appuals.