A common cause of high memory usage is the accumulation of processes, resulting from features such as Firefox’s Project Fission. Project Fission, designed to enhance security and performance through site isolation, can lead to increased memory use. Other contributing factors include extensions, hardware acceleration, and certain websites that demand more memory.

1. Update Browser:

Updating your browser can mitigate memory leaks by fixing bugs from previous versions. Newer versions often include optimizations that improve memory usage and enhance security, helping to prevent malware—one of the contributors to memory leaks.

1. Click on the menu button in the top right corner of Firefox.
2. Click on Help.
3. Select About Firefox.
4. Firefox will automatically check for updates. If an update is available, click Restart to apply it.

2. Disabling Themes and Extensions:

Disabling themes and extensions can aid in reducing memory consumption, streamlining the browser’s environment, and effectively lowering memory usage.

1. Click on the menu button in the top right corner of Firefox.
2. Scroll down and click on Help.
3. Select Troubleshoot Mode.
4. Choose Restart.
5. Type about:processes into the address bar, press enter, and view memory and CPU usage with Troubleshoot Mode enabled.
6. In Troubleshoot Mode, all extensions and themes are disabled, which allows for a clearer assessment of performance.
7. Identify and disable any problematic extensions or themes that may be affecting the memory usage.

3. Memory Optimization:

Performing memory optimizations can effectively manage usage and enhance overall performance.

1. Launch Firefox.
2. Type about:memory into the address bar and press Enter.
3. Click the minimize memory usage button below the Free Memory section to reduce memory usage.

4. Disable Hardware Acceleration:

Although hardware acceleration can improve rendering for some users, it might increase memory usage for others. Disabling this feature could help resolve memory leakage issues in Firefox.

1. Click on the menu button located in the top right corner of Firefox.
2. Scroll down and choose Settings.
3. Go to General on the left sidebar.
4. Under the Performance section, locate the relevant settings.
5. Deselect the option for “Use hardware acceleration when available.”
6. Restart Firefox for the changes to take effect.

6. Use Content Blocking:

Firefox comes equipped with content-blocking capabilities, which can help reduce the memory footprint by blocking trackers and other unwelcome content.

1. Open the menu button and select Settings.
2. Go to the Privacy & Security panel on the left side of the page.
3. In the Content Blocking section, select the desired level of protection.

7. Adjust Firefox’s Content Process Limit:

Decreasing Firefox’s Content Process Limit can help with memory management by reducing the total amount of memory used and isolating possible leaks in individual processes.

1. Navigate to Settings > Performance.
2. Uncheck the option for “Use recommended performance settings.”
3. Adjust the Content process limit to a lower number to test for improvements in memory usage.

8. Clean Up Browser History and Cookies:

Accumulated browsing data can slow down Firefox. Clearing your browser’s history, cookies, and cache regularly can help in managing memory usage more efficiently.

1. Click the menu button.
2. Select History and then click on Clear Recent History…
3. Choose the time range and the types of data you wish to clear, then click Clear Now.

9. Create a New Profile:

If memory issues persist with Firefox, creating a fresh profile may be beneficial. Follow the steps below:

1. Type about:profiles in the address bar and press Enter.
2. Click on Create a New Profile and complete the on-screen instructions.
3. Restart Firefox and log in using the new profile to check if the memory issue is resolved.

The post How to Fix Firefox Using Too Much Memory Issue? appeared first on Appuals.

The most frequent cause of this issue is a discrepancy between the drive’s encryption status and the system’s expectations. This might occur, for example, when the drive is expected to be encrypted but isn’t, or when there is an issue with the encryption key. The reason could vary from an interrupted encryption process, improper initiation, or system updates that have altered encryption settings.

Solution 1: Enable and Disable BitLocker

If the yellow triangle suggests that your BitLocker may be turned off, you can try to enable it with these steps:

1. Open File Explorer and click on This PC in the left pane.
   
2. Right-click on the problematic drive and select Turn on BitLocker.
   
3. Choose how you want to save your recovery key.
4. Click Next and follow the on-screen instructions.
   
5. Finally, click on Start encrypting. BitLocker will be enabled after some time, depending on the size and speed of your drive.
   

To disable BitLocker, follow these steps:

1. Right-click on the drive again and select Manage BitLocker.
   
2. Click on Turn off BitLocker and confirm by clicking Turn off BitLocker again.
   

Solution 2: Run the SFC and DISM Scans

Corrupted or missing system files, as well as issues stemming from Windows updates, can also cause this problem. The System File Checker (SFC) and Deployment Image Servicing and Management (DISM) tools are effective for repairing system files. Let’s try running the SFC and DISM scans.

SFC Scan:

1. Launch the Command Prompt as an administrator.
   
2. Enter the following command and press Enter:

   sfc /scannow

   

3. After the scan is complete, restart your computer to see if the issue is resolved.

DISM Scan:

1. Run the Command Prompt as an administrator once again.
2. Input this command and hit Enter:

   DISM /Online /Cleanup-Image /ScanHealth

3. After completing the scan, enter the following command:

   DISM /Online /Cleanup-Image /RestoreHealth

   

4. Finally, restart your computer after the process is finished.

If the software-based solutions provided do not resolve the issue, there may be a problem with your computer’s hardware. Connecting the disk to another computer could help determine whether the issue is with the disk itself or the computer.

If you are unsure how to proceed, seek assistance from a professional or take your computer to a nearby hardware repair store. Inform the technician about any personal or important files on your computer, as data loss is a potential risk. It’s also a good practice to back up your data before attempting any hardware diagnostics.

The post How to Fix Yellow Triangle Issue on Your Drive [BitLocker Error]? appeared first on Appuals.

Other factors contributing to this issue include router settings that do not support Bonjour—a protocol critical for AirPrint to function properly. For instance, printers such as the Brother MFC-L2700DW connect only through the 2.4 GHz band, so ensuring that both your printer and Apple device are connected to the same frequency band is vital.

Additionally, incorrect network configurations or outdated printer firmware can cause problems. Performing a power cycle on your devices, including the router, printer, and Apple device, can often resolve these issues by refreshing the network connection. Furthermore, it is essential to verify that your printer supports AirPrint and that this feature is enabled. Some printers, like certain HP models, may require you to confirm the wireless connection and enable AirPrint through the HP Smart app.

For Canon printers, it is recommended to ensure that the mobile device and the printer are on the same network. Attempt to reconnect the mobile device by forgetting the network and rejoining it. A power cycle of the router might also prove useful as a potential solution.

Lastly, some users have managed to resolve the problem by simply restarting their printer and checking for software updates, suggesting that the solution can sometimes be as straightforward as ensuring all devices are running the latest software versions.

1. Basic Troubleshooting

Before tackling more advanced solutions, let’s start with some basic steps.

1. Supported: Verify that the printer you’re trying to use is compatible with AirPrint.
2. Restart: Power down your devices in the following order:
   1. Router
   2. Printer
   3. iPhones or iPads
   4. Macs
   5. Other devices

After powering off each device, wait for three minutes before turning on the router. Wait another three minutes before turning on the printer. Continue waiting for three minutes before powering on the Apple devices (iPhone, iPad, or Mac). Finally, power on any other devices.

1. Update: Ensure that your printer’s firmware, the router, and the Apple devices are all up to date.
2. Wake Up: Ensure the printer isn’t in auto sleep mode when attempting to use AirPrint. You may need to press a button to wake it up, or you can set up an app to periodically ping the printer, preventing it from entering sleep mode.
3. Access Points: If your network has multiple access points, ensure they support the Bonjour protocol. Temporarily power down those not supporting the protocol.
4. Firewall: Check if your printer server’s firewall is blocking communication between your Apple device and the printer.

2. Rejoin the Apple Device to the Wi-Fi Network

If AirPrint cannot find supported printers on your network due to issues with the communication module, reconnecting the Apple device to the Wi-Fi network may resolve the problem.

1. Access the Settings on your iOS device and navigate to Wi-Fi.
2. Tap the info button next to the connected Wi-Fi network and select Forget This Network.

   

3. Confirm the action.
4. After restarting the related devices, rejoin the iOS device to the Wi-Fi network and test AirPrint.
5. If the problem persists, reconnect the printer to the Wi-Fi network and try to print again.

3. Disable Private Wi-Fi Address in the Apple Device Settings

Apple devices use a Private Wi-Fi Address feature to enhance privacy. However, this feature can interfere with local network communication, which is necessary for AirPrint. Disabling the Private Wi-Fi Address in Apple device settings may solve the issue.

1. Open the Settings app on the iPhone and tap Wi-Fi.
2. Tap the Info icon next to your Wi-Fi network and switch off Private Wi-Fi Address.

   

3. Restart all related devices and test AirPrint.

4. Disable Limit IP Address Tracking

The “Limit IP Address Tracking” feature, when activated on your Apple device, can interfere with the operation of the Bonjour protocol, affecting AirPrint. Disabling this feature might help resolve the issue.

1. Open Settings and tap Wi-Fi on your iPhone.
2. Press the info icon for your network and switch off Limit IP Address Tracking.

   

3. Restart your devices and try printing via AirPrint.

5. Enable IPv6 on the Printer

IPv6 is essential for AirPrint in many IT environments, and if it’s disabled on your printer, the Bonjour protocol may be unable to locate the printer. Therefore, enabling IPv6 on the printer could be a solution.

1. Access the Printer Settings and select Network Settings > TCP/IP Settings.

   

2. Turn on IPv6 and restart your devices.

6. Disable SSL for AirPrint in the Printer Settings

If SSL is enabled for AirPrint but the network is not configured correctly to support it, AirPrint service may fail to find compatible printers. Disabling SSL for AirPrint in the printer settings can resolve this issue.

1. In the printer’s interface or remote UI, go to Settings > AirPrint Settings.
2. Access SSL Settings under Other Settings and deactivate it.

   

3. Restart the devices and attempt printing through AirPrint.

7. Disable the VPN and Delete Its Profile from the Apple Device

AirPrint relies on the Bonjour protocol, which requires your device to be on the same network as the printer. A VPN can disrupt this requirement, leading to connectivity issues.

7.1. Enable Connect on Demand for the VPN

1. Open the Settings app on your iPhone and go to General > VPN.
2. Tap the Info button next to your VPN (e.g., Private Internet Access) and select Connect on Demand.

   

3. Enable this setting and test AirPrint.

7.2. Edit the VPN Options

1. Open Safari, head to Preferences, and click on Extensions.
2. Select Norton Web Safe.

   

3. Disable the extension and restart your devices.

7.3. Disable VPN

1. Access Settings > General > VPN.
2. Deactivate the VPN and restart your devices.

   

3. After rebooting, try AirPrint again and check the results.

7.4. Delete the VPN Profile

1. With the VPN disabled, head to Settings > General > VPN & Device Management > VPN.
2. Tap the VPN profile you wish to remove it.

   

3. Restart your iPhone and test AirPrint.

7.5. Delete the VPN App

1. Press and hold the VPN app icon on the home screen.

   

2. Select Delete App and confirm its removal.
3. Restart your iPhone and evaluate AirPrint’s performance.

7.6. Delete Other Apps

Some apps can interfere with AirPrint. Consider uninstalling apps such as:

1. The Marriott Bonvoy App
2. All printer-related apps like HP ePrint, HP Smart, etc.

8. Reset Network Settings of the Printer and Apple Device

Incorrect network settings on the printer or Apple device can prevent you from using a supported AirPrint printer. Resetting these settings might be the solution you need.

Before proceeding, note your current network settings (Wi-Fi credentials, VPNs, etc.), as you’ll need this information to reconfigure both the iOS device and the printer later.

8.1. On the Apple Device

1. Open the Settings menu and select General > Reset.
2. Choose Reset Network Settings and confirm to initiate the reset.

   

3. Once the reset is complete, restart your iPhone, router, printer, and print server.
4. Reconnect the iPhone to the Wi-Fi network and attempt printing via AirPrint.

8.2. On the Printer

Resetting network settings might differ by printer model. Below is a generic guide using the Epson Artisan 800 series as an example.

1. At the printer’s control panel, press the Home button and navigate to Setup > Restore Default Settings.
2. Select Reset Network Settings and confirm to start the reset.

   

3. After completing the reset, restart your printer, print server, router, and Apple device.
4. Re-establish the printer’s connection to the network and test AirPrint functionality.

9. Edit the Router Settings

The “No AirPrint printers found” error can occur when router settings prevent the Apple device from communicating with the printer, which may be due to conflicts with the Bonjour protocol. Modifying router settings can address this problem.

Note that some settings discussed below may not apply or may be labeled differently on your router. Make adjustments using a web browser or the router manufacturer’s app.

9.1. Disable Block LAN to WLAN Multicast and Broadcast Data

1. In the router’s Wi-Fi Settings, go to Wireless Networks and select Edit for your SSID.
2. Deselect the option for Block LAN to WLAN Multicast and Broadcast Data.

   

3. Save your changes and restart the devices.

9.2. Enable the 2.4 GHz Band of the Router

1. Access your router’s Wi-Fi settings and enable the 2.4 GHz band. Disable the 5 GHz band if necessary, then restart your devices.

   

2. Ensure the devices are connected to the 2.4 GHz network and check AirPrint again.

9.3. Enable IPv6 on the Router

1. After enabling IPv6 on the printer (as previously discussed), proceed to enable IPv6 on the router as well.
2. Go to the router’s Wi-Fi settings and enable IPv6.

   

3. Go to DHCP Server settings and ensure it’s enabled.
4. Save the adjustments, restart the devices, and re-establish a connection to the Wi-Fi network. Attempt to print with AirPrint.

9.4. Change the Security Mode of the Wi-Fi

1. Open your router’s Wi-Fi settings and locate the Security Mode option.
2. Select a different method from the dropdown menu. For example, change from WEP to WPA2-PSK if necessary.

   

3. Apply the changes and restart your devices.
4. Run an AirPrint test to see if the printer is now detectable.
5. If the problem remains, experiment with different security settings to find compatibility with your environment.

10. Reinstall the Printer Driver on the Print Server

If the print driver or application on the print server is malfunctioning, it may impede the relay of AirPrint commands to the printer. Reinstalling the printer driver on the print server may solve this issue.

1. Right-click on the Start button and open Device Manager.
2. Expand the Print queues section and right-click on the printer in question.
3. Select Uninstall device and confirm the removal.

   

4. Open Apps & Features from the context menu of the Start button.
5. Find the printer’s software, expand its options, and choose Uninstall.
6. Navigate to Bluetooth & devices > Printers & scanners in the Settings menu.
7. Select the problematic printer and press Remove device.

   

8. Complete the uninstallation, reboot the print server, and associated devices.
9. Reinstall the printer driver and software on the print server.
10. Restart the devices, reset the network settings on your Apple device, and reconnect to the Wi-Fi network to try AirPrint.

11. Reset the Printer, Router, and Apple Device

Malfunctions in the firmware of the printer or router, or in the OS of the Apple device, might block printer compatibility with AirPrint. In such cases, a reset of the affected devices may be necessary.

Back up any vital data before resetting because the process will erase it. Also, for the router, make a note of the configuration settings needed to reconnect to the internet.

11.1. Reset the Printer

1. On the printer, press the Setup or Menu button.
2. Go to Printer Maintenance > Restore settings.
3. Select Restore Factory Defaults and confirm with Yes.

   

4. Configure the printer after the reset, restart it, and test AirPrint.

11.2. Reset the Router

1. Find the reset button on the router and press it with a paperclip or similar object for about 30 seconds.

   

2. Release the reset button and wait for the router to power up and stabilize.
3. Follow the manufacturer’s guidelines to reconfigure the router, then restart other devices.
4. Re-establish connections to the network and assess AirPrint’s functionality.

11.3. Reset the Apple Device

1. Go to Settings and access General > Transfer or Reset iPhone.
2. Select Erase All Content and Settings.

   

3. Confirm your intention to erase and then set up the iPhone post-reset.
4. With the other devices rebooted, test AirPrint.

12. Workarounds

In the interim, consider the following temporary solutions until the issue is resolved by Apple:

• Print from another system, device, or phone.
• Utilize the manufacturer’s OEM app for printing (e.g., Samsung Mobile Print app or HP Smart).
• Connect a supported printer to the Apple device via a USB-C to USB adapter and print through it.
• Try printing by using the IP address of the printer.

The post How to Fix ‘No AirPrint Printers Found’ Issue on Apple Devices? appeared first on Appuals.

The most common cause of this issue is the domain controller being offline, possibly due to maintenance or a power outage. Other contributing factors may include improper configuration of the client device, network connectivity problems, host server issues, or incorrect DNS settings.

Having discussed the causes, let’s now delve into the solutions to this error.

1. Check for Errors in Windows Event Viewer

To gain insight into the cause of this error, it is wise to first consult the Windows Event Viewer for any domain controller-related errors.

1. Press the Win key, type Event Viewer, and press Enter to open it.
2. Expand the Windows Logs section and select System.
3. Focus only on the events that contain keywords associated with a domain controller and have sources such as DNS.
4. Upon locating an appropriate event, analyze the event ID. If DNS is not configured properly, you might see an Event ID that indicates an issue with DNS resolution for the domain.

2. Ping the Hostname and DC (Domain Controller) from the Client Device

It is recommended to start by checking the basics before proceeding with more complex troubleshooting steps. Pinging the DC (Domain Controller) from the affected device will help verify whether the DC is reachable.

2.1 Domain Controller

1. On the DC, open the Command Prompt.
2. Type the following command to display network details:

   ipconfig/all

3. Note the IPv4 address to use later on the affected device.
4. Also, remember the hostname so you can ping it from the affected device along with the IPv4 address.

2.2. Affected Device

1. Click the Start Menu and search for Command Prompt.
2. Press Enter to launch the Command Prompt.
3. Type ping followed by the DC IP address you copied earlier.
4. Ping the hostname by typing ping followed by the hostname.
5. If the DC is accessible, verify that it can also reach the affected device.

3. Ping the Affected Device from the DC (Domain Controller)

Having pinged the DC, the next step is to try pinging the affected device from the DC to ensure connectivity.

3.1 Affected Device

1. Press the Win key and search for Command Prompt.
2. Press Enter to enter the Command Prompt.
3. Execute the command ipconfig/all by pressing Enter.
4. Copy the IPv4 address to use in the next steps on the Domain Controller.

3.2 Domain Controller

1. In the Command Prompt on the DC, ping the affected PC by typing:

   Ping <copied IPv4 address>

   

2. If the DC can reach the client PC, this suggests that the issue lies with your DNS settings.

4. Configure the DNS on the Affected Device Correctly

Given that the DC and the client PC can communicate with each other, it is highly likely that your DNS settings are not properly configured.

Your DNS settings may be defaulting to those of your router rather than those of your domain, preventing the affected PC from accessing the DC and causing this error. Therefore, updating your DNS settings is necessary to resolve the domain when connecting to the DC.

4.1 Domain Controller

1. Once more, open the Command Prompt on the DC and enter ipconfig/all.
2. Note the IPv4 address and then proceed with the instructions on the affected device.

4.2 Affected Device

1. Access the Control Panel by typing it into the Start Menu.
2. Go to Network and Internet > Network and Sharing Center.
3. From the left sidebar, click on Change Adapter Settings.
4. Right-click your Network Adapter and choose Properties.
5. Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
6. Opt for Use the following DNS server addresses.
7. In the Preferred DNS Server field, enter the IPv4 address you recorded earlier.
8. For the alternative DNS, input 8.8.8.8.
9. Click OK to save the changes.
10. Attempt to connect to the DC from the affected device again; it should now be successful.

The post Fix: The system cannot contact a domain controller to service the authentication request appeared first on Appuals.

The most frequent reason for this prompt is the detection of a potential security risk, like an unauthorized attempt to access the system, which in turn activates BitLocker’s protective mechanism. Other causes include changes to the BIOS, TPM firmware updates, or modifications to the boot sequence that are perceived as security threats.

Additionally, it’s noteworthy that some users have faced issues where the recovery key doesn’t seem to work, even when the recovery key ID matches, leading to confusion as to why access is not granted. For those who have linked their Microsoft account to their device, the BitLocker recovery key is typically automatically uploaded to Microsoft’s servers, offering a recovery solution when the physical key is lost or unresponsive.

How BitLocker Works

With BitLocker enabled, the Trusted Platform Module (TPM) chip encrypts and decrypts data on your computer by determining whether the drive should be locked or unlocked through a series of checks to prevent unauthorized access.

The TPM chip monitors changes to the hardware, BIOS, Windows kernel files, boot components, and looks for firmware updates as potential unauthorized access attempts.

Such modifications can trigger the BitLocker Recovery screen, where entering the recovery key is needed.

You can find your BitLocker key through various methods. This guide will walk you through all available options for your particular situation.

1. Use the Command Prompt

If you are not presented with the BitLocker Recovery screen, you can use the Command Prompt to retrieve and secure your BitLocker key.

This can be done with the ‘manage-bde’ command, which manages BitLocker on your computer.

1. Open the Start Menu and search for Command Prompt.
2. Select the Run as administrator option.

   

3. Click Yes on the User Account Control dialog.
4. Enter the command below, replacing C: with the drive you are working with, and hit Enter.

   manage-bde -protectors C: -get

   

5. To find the recovery key for a remote computer, use this command instead, substituting the placeholders with actual values:

   manage-bde -forcerecovery -ComputerName <RemoteComputerName> C:

6. Make sure to replace <RemoteComputerName> and the drive letter appropriately.

2. Recover the BitLocker Key via Microsoft Account

When enabling BitLocker on personal devices, it’s recommended to save the recovery key to your Microsoft Account. If this applies to you, use the Microsoft Account portal to find your key.

1. Visit the Microsoft Account website by clicking here.
2. Sign in with your Microsoft account credentials.
3. Under the Devices section, select the View Details option.

   

4. Find and click on the Manage recovery keys link under BitLocker data protection in the device details menu.

   

5. Your BitLocker recovery key will be displayed.

   

6. Match the Key ID from this list with the one shown on the BitLocker Recovery screen.

3. Recover the BitLocker Key from a USB Flash Drive

When activating BitLocker, you may also opt to save the recovery key on a USB flash drive. It will be saved in a text file named “BitLocker Recovery Key” followed by a unique Key ID.

Insert the USB into another computer and open the text file to find the BitLocker Recovery key along with the Identifier. Match this Identifier with the one shown on the BitLocker Recovery screen.

4. Recover the BitLocker Key from the Azure Portal

For a device that’s part of an Azure Active Directory network, a system administrator can locate the recovery key within the Azure AD portal.

1. Access the Azure portal via this link.
2. Proceed to Azure Active Directory.
3. Select the All devices tab and click on the relevant device.

   

4. At the bottom of the Properties page, the recovery key can be found.
5. Click the Show Recovery Key button to view it.

   

6. If you aren’t sure of the device name in the Azure Portal, utilize the Key ID.
7. Click on the BitLocker Keys section.
8. Enter the Key ID in the search field to find the respective recovery key.

   

5. Using Active Directory

You can retrieve the BitLocker recovery key via Active Directory provided that you configure a Group Policy to save the recovery key there.

1. Press the Win key + R to open the Run dialog.
2. Type gpedit.msc, then hit Enter.

   

3. In the Group Policy Editor, go to Administrative Templates > Windows Components > BitLocker Drive Encryption.
4. Double-click on the Store BitLocker Recovery Information in Active Directory policy.

   

5. Set it to Enabled and click Apply.

   

6. Open the Active Directory Users and Computers application.
7. Navigate to the respective computer, and open its properties.
8. In the properties, locate the BitLocker Recovery tab to find the recovery key.

   

If you cannot see the BitLocker Recovery tab, it could be because you haven’t installed the BitLocker Drive Encryption Administration Utility feature.

1. Open the Server Manager.
2. Head to Manage > Add Roles and Features.
3. In the Features section, expand the Remote Server Administration Tools category.
4. Expand the list for Feature Administration Tools.
5. Check the box for BitLocker Drive Encryption Administration Utilities, then click Install.

   

These various methods should enable you to retrieve the BitLocker Recovery key for different situations.

The post How to Find and Recover Your BitLocker Recovery Key? appeared first on Appuals.

Other contributing factors include the timing of software updates and the inclusion of certain files in system backup snapshots or shadow copies, which can lead to false positives. It’s crucial to recognize that this detection may not represent a true threat but could instead be a misclassification of harmless data as harmful.

The incorrect malware detection by Microsoft Defender in this instance originated after a security intelligence update in December, specifically version 1.403.1079.0. In most cases, the issue can be resolved by whitelisting the Profiles folder.

This guide will demonstrate how to address the Microsoft Defender detection using various methods, covering different scenarios.

Check Malware Detection Source

To determine if the malware warning from Microsoft Defender results from Mozilla Firefox, examine the file path of the affected item. If the file path includes “Mozilla” or “Firefox,” the web browser is likely the cause.

If there is no mention of Firefox in the file path, then your computer might be infected by actual malware, and you should perform a system-wide security scan. Refer to the last method in this guide if this is the case.

1. Clear Protection History

Clearing Microsoft Defender’s protection history is an effective first step to resolve any erroneous detections, which should remove the issue.

No direct option exists for clearing the protection history in Microsoft Defender, requiring you to manually delete the history files in File Explorer.

1. Open File Explorer by clicking the icon in the taskbar.
2. Click on the View drop-down menu and select Show > Hidden items.

   

3. Navigate to the following path:

   C:\ProgramData\Microsoft\Windows Defender\Scans\History\Service

4. If access to the folder is restricted, boot into Safe Mode.
5. Press Win key + R to open the Run dialog.
6. Type msconfig and press Enter.

   

7. Go to the Boot tab in the System Configuration window.
8. Select the Safe boot checkbox and restart to enter Safe Mode.

   

9. Follow the earlier steps to access the protection history folder.
10. Delete all files within the folder and reboot your computer.
11. Check if the issue has been resolved.
12. Remember to uncheck the Safe Boot option to exit Safe Mode, as described in this tutorial.

2. Exclude Firefox Profiles Folder

Whitelisting the Profiles folder in Mozilla Firefox’s cache can rectify the incorrect malware detection by preventing Microsoft Defender from scanning this directory, thus eliminating the issue.

1. Open the Start Menu and search for Windows Security. Launch it.

   

2. Switch to the Virus and Threat Protection tab.

   

3. Click the Manage settings link under protection settings.

   

4. At the bottom, click Add or remove exclusions.

   

5. Select Add an exclusion.
6. Choose Folder from the drop-down menu.
7. Ensure hidden files are visible, then navigate to:

   C:\Users\[YourUsername]\AppData\Local\Mozilla\Firefox

8. Select the Profiles folder and click Select Folder.

3. Clear Firefox Cache on Close and Delete Shadow Copies

Resolving the Trojan:HTML/Phish!pz detection can be as simple as setting Firefox to clear its cache upon closing and deleting Windows’ shadow copies—snapshots of files used for restoration purposes.

This process is particularly helpful when encountering the issue during backups:

1. Launch Mozilla Firefox.
2. In the top-right, click on the More menu and select Settings.

   

3. Go to the Privacy and Security section.
4. Check the option Delete cookies and site data when Firefox is closed.

   

5. Open the Start Menu, search for Disk Cleanup, and start it.

   

6. Select your system drive (usually C:) and click OK.

   

7. Click Clean up system files.

   

8. Select the system drive again and click OK.
9. Move to the More Options tab.
10. Under System Restore and Shadow Copies, click Clean up.

    

11. Choose Delete.
12. Performing these steps should resolve your issue.

4. Update Mozilla Firefox

An outdated Mozilla Firefox may be to blame for the invalid Trojan:HTML/Phish!pz detection. Any inconsistencies usually get addressed in newer versions, so keeping Firefox up-to-date is essential:

1. Start Mozilla Firefox.
2. Click the More menu and navigate to Help > About Firefox.

   

3. Allow Firefox to check for and download any updates automatically.
4. Install the updates if available and restart Firefox.
5. See if this resolves the detection issue.

5. Run Security Scan

If none of the above methodologies resolve the Trojan:HTML/Phish!pz detection and it’s not caused by Firefox, a comprehensive security scan may be needed.

You have the option of various third-party antivirus tools or Windows Defender, which can be effective if your system is up to date:

1. Access the Start Menu and look for Windows Security; launch it.

   

2. Proceed to the Virus and Threat Protection section.

   

3. Click on Scan options.

   

4. Choose Microsoft Defender Antivirus (offline scan).

   

5. Hit Scan now and let the scan complete, which could take 15-20 minutes.
6. Upon scan completion, your problem should most likely be resolved.

The post How to Resolve the “Trojan:HTML/Phish!pz” Alert in Windows Defender? appeared first on Appuals.

In scenarios where a device lacks GPS capabilities, Windows relies on IP address location, which cannot be changed, resulting in discrepancies between your actual location and the one reported by your device. Other factors contributing to incorrect location reports include system or application corruption, outdated location history, and issues with the Geolocation service.

Several users have encountered persistent inaccuracies even after moving to a new location, suggesting that the problem might also be linked to the router’s MAC address or the device’s stored location data. Even after updating their default location settings, their devices continue to report their old locations, affecting all location-dependent services.

This article will show you how to accurately represent your location in various Maps services on Windows.

1. Forget Wi-Fi Connection

If you are using an old router at a new location, begin troubleshooting the issue by forgetting your Wi-Fi connection. This will force the Windows Location Service to update the MAC addresses it uses for your location, and could resolve the issue.

After forgetting the Wi-Fi connection on your computer, re-establish a new connection with the same access point:

1. Click on the Wi-Fi icon in the taskbar.
2. Right-click on your Wi-Fi network and select Forget.

   

3. Then, click the Connect option and enter the password.
4. Open the maps service again to check if the problem still exists.

2. Delete Location History

Windows stores your location locally for a limited time to prevent frequent triangulation and save system resources.

If the stored location in your location history is incorrect, it will cause the Maps app to display the wrong place. Clear the location history in Windows to fix this:

1. Open the Settings app with the Win key + I shortcut.
2. Navigate to the Privacy and security > Location menu.

   

3. Click Clear under the Location History section.

   

4. Restart the Maps service afterward to see if there’s any improvement.

3. Manually Change Location

You can manually change your computer’s location if it is calculated incorrectly, potentially resolving any inconsistencies caused by the Maps service not detecting a precise location.

Set the default location via the Settings app in Windows:

1. Press Win key + I to open the Settings app.
2. Navigate to the Privacy and security > Location section, as shown previously.
3. Click the Set default option next to Default Location.

   

4. Enter your location in the Maps app that opens.

   

5. This location will be used as the default when Windows cannot detect your real location.

4. Turn Off Location Service

If you receive an incorrect location while using Google Maps or other third-party location services, it could be due to interference from the Windows Location Service.

Since Google Maps operates independently from the Location Service in Windows, you can turn it off without concern:

1. Open the Settings app by pressing Win key + I.
2. Navigate to the Privacy and security > Location menu as shown above.
3. Turn off the Location services using the toggle switch.

   

4. Refresh Google Maps and determine if the issue has been resolved.

5. Remove Incorrect MAC Address from Windows Location Service

Windows uses MAC addresses of nearby access points to help determine your current location. If the MAC addresses in the Windows database are incorrect, it can lead to inaccurate location readings.

To rectify this, delete the incorrect MAC address from the location service database:

1. Search for Command Prompt in the Start Menu and open it.

   

2. Type netsh wlan show networks bssid in the Command Prompt and press Enter.
3. Copy the BSSID address and navigate to the Windows Location Services website here.

   

4. Enter the BSSID address in the provided field.
5. The removal process may take a few days to complete.
6. Turn off your Wi-Fi adapter through the Quick Menu with the Win key + A shortcut.

   

7. Open the Maps app and click the Show my location icon.

   

8. Turn your Wi-Fi adapter back on, and check to see if the problem has been resolved.

6. Renew DNS Cache and IP Address

If the incorrect location issue persists, flush the DNS cache on your computer and renew your IP address. This action can prompt the Windows Location Service to recalculate your location, which may fix the issue:

Flush the DNS cache and renew your IP address with the following commands in Command Prompt:

1. Open an elevated Command Prompt by searching for it in the Start Menu and selecting Run as administrator.

   

2. Enter these commands, pressing Enter after each:

   ipconfig /flushdns 
   ipconfig /registerdns 
   ipconfig /release 
   ipconfig /renew 
   netsh winsock reset

   

3. Restart your computer afterward and verify the accuracy of your location.

These methods should help you resolve any incorrect location issues in Windows. If the problem continues, contact the Microsoft support team for further assistance.

The post How to Fix Inaccurate / Wrong Location Detection Issue in Windows? appeared first on Appuals.

The Amazon Alexa app requires Cortana on Windows for functionality, which was phased out in late 2023. Despite this, you can still use the cached Microsoft App link for Alexa to install the app on certain PCs.

Additionally, the official availability of the Amazon Alexa app is limited to the following regions:

Nevertheless, there are alternative methods you can employ to install the Amazon Alexa app on your Windows device. It’s important to keep in mind that the app may not work consistently if installed through these means.

1. Install Microsoft Store Updates

The ‘Download’ option for the Amazon Alexa app no longer appears in the Microsoft Store. However, if your PC meets the app’s specific requirements, you might be able to circumvent this by installing any pending updates to the Microsoft Store.

To meet the requirements for Amazon Alexa, you need certain BIOS versions, audio drivers, among other specifics. More information can be found on the support page here.

1. Open the Microsoft Store by searching for it in the Start Menu.

   

2. Click on the Library icon located in the bottom-right corner.

   

3. Select the Get updates option to download and install any available updates.

   

4. The app will also update the Microsoft Store.
5. Once the updates are complete, try searching for the Alexa app again to see if it is now available for download.

2. Download Using Microsoft Apps

You can also install the Amazon Alexa app by using the Microsoft Apps website. This method can be an effective alternative if the Microsoft Store does not allow you to download the app.

The Microsoft Apps website keeps a cache of previous versions of apps, which can be helpful if you’re dealing with installation issues associated with the Microsoft Store.

1. Access the official Amazon Alexa page for Microsoft Apps by clicking here.
2. Click on the Download option.

   

3. A pop-up should appear prompting you to Open Microsoft Store; click it.
4. In the Microsoft Store pop-up, select the Get option for the Amazon Alexa app.

3. Use Winget to Install Amazon Alexa

The Windows Package Manager (Winget) is a command-line utility for installing and managing apps on Windows. You can use Winget to force install the Amazon Alexa app.

Winget installs apps using their unique IDs, which correlate with the link provided in the Microsoft Apps repository for the Amazon Alexa app.

1. Open the Microsoft Store again by searching for it in the Start Menu.

   

2. Search for App Installer and select the corresponding result.

   

3. Select the Get option to install it, which will also install the Winget utility.
4. Next, search for the Terminal via the Start Menu and open it.

   

5. In the Terminal window, paste the following command and hit Enter:

   winget install --id=9N12Z3CCTCNZ

   

6. Press Y to accept the license terms when prompted.
7. The code ‘9N12Z3CCTCNZ’ is the unique ID for the Amazon Alexa app.

4. Download Amazon Alexa from Third-Party Source

Alternatively, you can obtain the Amazon Alexa app from a third-party source. The Adguard Store is considered safe as it only generates a direct download link for Microsoft Store apps.

1. Begin by visiting the official Microsoft Apps page for Alexa by clicking here.
2. Next, navigate to the Adguard Store website through this link.
3. Copy the URL from the Alexa app page on Microsoft Apps and paste it into the search field of the Adguard Store.

   

4. Select Retail in the drop-down menu.

   

5. Hit the checkmark icon or press Enter.
6. Click the .appxbundle link for the latest version to download it.

   

7. Execute the downloaded file to install the Amazon Alexa app on your system.

These strategies should enable you to download the Amazon Alexa app onto a Windows device. Bear in mind that the Alexa app is no longer supported officially by Microsoft, so you may experience bugs and inconsistencies while using the app.

The post How to Install Amazon Alexa on Windows After Cortana Support Ends? appeared first on Appuals.

Basic Troubleshooting

Begin with a simple step:

• Power cycling: Turn off the console and disconnect all cables (USB, HDMI, LAN, Power, etc.). Remove the console’s hard drive and leave it unattached for 2 hours. Afterwards, reconnect only the USB, HDMI, and power cords. Attach the controller and power on your PS4.

1. Initialize the PlayStation

The SU-41333-4 error sometimes appears when a crucial software component within the console is corrupted, making a file inaccessible. Initialization of the PS4 can resolve this issue.

Be aware that this will erase all data on the console that isn’t backed up either locally or online.

1. Turn off the PlayStation. Once the status light is off, unplug any external devices.
2. Press and hold the console’s power button.
3. Release the button upon hearing the second beep, approximately 7 seconds later.
4. Connect a controller via a USB cable and press the PS button.
5. Select option 6, Initialize PS4 (Full Factory Reset).

   

6. Follow the onscreen instructions to reconfigure your PlayStation.

2. Reinstall the System Software on the PS4

If the PS4’s system software is severely damaged and can’t be restored to factory settings, reinstalling the software can fix the problem.

Note that this will permanently erase all unsaved data on the internal drive.

1. Use a USB storage device and connect it to your desktop PC (Windows, Mac, etc.).
2. Format the device with the exFAT file system and create a folder named PS4 (in uppercase).
3. Inside the PS4 folder, create a subfolder called UPDATE (also in uppercase).
4. Go to the official PS4 system software download page and download the PS4 Console Reinstallation File (about 1 GB). Rename the downloaded file to PS4UPDATE.PUP (all uppercase).

   

5. Transfer the file to the UPDATE folder on your USB device, then safely eject it from your PC.

   

6. With the PlayStation powered off and the status lights out, insert the USB device containing the update into the console.
7. Hold the Power button until a second beep is heard (about 7 seconds), then release.
8. Connect the controller via a USB cable and press the PS button. Choose option 7, Initialize PS4 (Reinstall System Software).

   

9. Select Update from USB Storage Device and confirm with OK. If the USB is not detected, try again with the USB plugged into a different slot. Moreover, check that the folder and file names match those specified in steps 3 to 8.
10. Wait for the process to finish and proceed to configure your console.

3. Format the Console’s Hard Disk on a PC

An SU-41333-4 error may occur if the PS4 cannot perform read/write operations on its disk. Initializing the console will not remedy this; instead, you will need to format the hard disk on a PC.

Below, we outline the steps for a Windows PC:

1. Power off the console and remove its hard disk.
2. Connect the hard disk to a PC or laptop. An adapter may be necessary.
3. Right-click the Windows start button and choose Disk Management.
4. Locate the console’s hard disk by its size and record its disk number (e.g., Disk 1).

   

5. Press the Windows key, search for Command Prompt, and run it as an administrator.
6. Enter the following command and press Enter:

   diskpart

7. Enter the next command and press Enter:

   list disk

8. Identify the console’s hard disk by the number noted before and its size. Use the number to select the correct disk, as selecting the wrong disk can cause irreversible data loss.
9. Type the following, substituting “x” with your console’s disk number:

   select disk x

10. If, for example, the console’s hard drive is Disk 1, double-check and then type:

    select disk 1

11. Execute the following, which will irreversibly wipe all data on the disk:

    Clean

    

12. Type Exit and press Enter to leave the Diskpart utility.
13. Close Command Prompt and disconnect the hard disk from your PC.
14. Finally, reattach the hard disk to your PlayStation and reinstall the system software as previously described.

If the problem still lingers, it may be due to a hardware issue, ranging from a blown capacitor on the motherboard to a defective hard drive.

The post How to Fix SU-41333-4 Error on Your PlayStation Console? appeared first on Appuals.

When a device is connected to the Access Point (AP) or Router, it automatically receives an IP address from the DHCP (Dynamic Host Configuration Protocol). Each AP has a set limit on the number of clients it can support. When this limit is reached, the AP is unable to accept additional clients, which leads to the “Access Point Temporarily Full” error.

This error often occurs for users who share a network connection through a hotspot, especially when the host has set a limit on the number of connectable devices within the hotspot settings.

Additionally, your Internet Service Provider (ISP) might impose restrictions on the number of clients that can connect to an access point, although this is less common.

Other contributing factors might include network settings that inadvertently restrict the number of possible connections or technical issues causing a false indication of a full network. Some users have reported that temporarily solving the problem by rebooting their router resets the list of connected devices and allows for new connections.

1. Increase the limit from your hotspot settings

If you encounter this error when trying to connect to a hotspot connection, request that the hotspot provider increases the connection limit in their settings. This way, you can connect without receiving an error message.

1. Open Settings and navigate to Wireless Connection Settings.
2. Proceed to Hotspot Settings.
3. Find and tap the option related to Connection Management or Connected Devices.
4. Select Limit of Connected Devices or Maximum Allowed Connections and increase the limit or choose Unlimited.
5. Having done this, the issue should be resolved.

2. Contact your ISP to increase the limit

As mentioned before, your ISP might have set a limit for the AP. For routers, this tends to be more prevalent. You can ask your ISP to increase the limit, or you can attempt to modify it yourself by accessing the AP’s portal through your web browser.

3. Update your firmware

If your firmware is outdated and only supports a limited number of connections, such as 16, a firmware update could be available that allows for 32 connections or more. Access the portal to look for options related to the maximum number of connections or contact your ISP for help with updating the firmware. It’s best to explain the situation to them so that they can address the issue appropriately.

4. Enable the 2.5GHz and 5GHz bands

It is possible that your hardware only supports a limited number of clients, such as 10, on each band. If many clients are connected to the same band, this could be causing the “Access Point Temporarily Full” error. To rectify this issue, try enabling both the 2.5GHz and 5GHz bands.

1. Press the Win key and type Command Prompt.
   
2. Press Enter to open the Command Prompt.
3. Type ipconfig/all and press Enter.
   
4. Copy the default gateway IP and paste it into your web browser to access the router’s admin panel.
   
5. Log in with the credentials, or try “admin” for both username and password if you are unsure of them.
   
6. Navigate to Network Settings.
7. Enable Wireless 2.4 GHz and Wireless 5 GHz simultaneously.
8. Disconnect all devices from your router.
9. Reconnect the devices and check if the error has been resolved.

If none of these solutions work, consider resetting the AP or the router. For assistance, it’s advisable to contact your ISP and follow their guidance to reset the router or AP, thus resolving the error.

The post How to Fix ‘Access Point Temporarily Full’ Error in Windows? appeared first on Appuals.