We may earn a commission for purchases made through our links. Learn More

 

5 Best GPU Support Brace To Prevent GPU Sag

We are seeing new graphics cards with more power than ever before these days, like the RTX 3070 or the RX 5700XT. However, after installing these beefy GPUs, people are starting to notice a new issue. Not only are graphics cards getting more powerful, but some vendors are also making them bigger in physical size than their predecessors. It’s painful enough to find a case compatible with these GPUs, but there’s more to the story. If the GPU is too heavy, it can start to sag.

Now, you might be thinking this is not a big deal. Sure, for some time it’s fine, but if you keep your graphics card around for several years, keep reading. The first issue is that it ruins the aesthetics and symmetry of the building. Secondly, with that weight hanging over, it can potentially start to damage the PCIe port in the longer run. This is a worst-case scenario but can be possible. That’s where a GPU support brace comes in.

They are quite common nowadays because of how heavy the GPUs are becoming. Getting a GPU support brace for yourself is a great decision because there really isn’t anywhere you can go wrong with that. Below is our list of the top 5 GPU support braces that we think you should be looking into.

1. CoolerMaster ELV8

Form And Function

Pros

  • Addressable RGB
  • Solid steel build
  • Easy to move slider
  • Easy installation

Cons

  • A little expensive for a support brace

1,908 Reviews

Type: Horizontal | RGB: Yes | Material: Steel and Plastic

Seeing as how CoolerMaster has built up its reputation, it should come as no surprise that we’re seeing their name in the list for the top GPU support braces. Even a simple product as a support brace can be styled up a notch and that’s exactly what CoolerMaster has done. For those who want to lose no style points, CoolerMaster ELV8 is the GPU support brace you should be looking out for.

The ELV8 support brace is a horizontal brace that is built with strong and sturdy metal. That is evident by the fact that your GPU can easily hold its weight if you’re using this brace. Moreover, it also has addressable RGB lights that are compatible and can be synced with MSI, Gigabyte, and ASRock motherboards. Due to its length, you can support almost all of the GPUs in the market right now and it is quite easy to do so as well. Using the 3 pins, you can screw the ELV8 in place and the slider with the screw lets you adjust the length that’ll correspond to the GPU you’re supporting with the ELV8.

While taking care of your GPU is good, it is also wise to take care of your CPU as well by investing in a good airflow case and a good CPU cooler.

With the CoolerMaster ELV8, there is very little that can go wrong. Solid steel holding your GPU up to prevent sag and damage to your motherboard and not compromising on style and aesthetics either. The price seems a little extensive for a simple product such as a GPU brace but you get addressable RGB with it as well so there’s a bonus too.

Related read: Best Micro-ATX cases

2. upHere Addressable RGB Brace

Flashy Design

Pros

  • RGB support for most motherboards
  • Rubber pad does not damage the surface of the GPU
  • Good and sturdy design
  • Sliding rubber pad

Cons

  • 6 screws are a little too much to deal with

5 Reviews

Type: Horizontal | RGB: Yes | Material: Aluminum and steel

Next up on our list is a support brace by upHere. Like the previously mentioned one by CoolerMaster, this one too has addressable RGB in it. Without compromising on any front, you have a GPU support brace that will most definitely hold even the heaviest of cards with ease.

Built of the same strong and sturdy metal as before, the upHere addressable RGB brace for your GPU is also fancy and stylish. At times, we wonder if adding another component in our PC case will reduce the aesthetics of the already present ones. Illuminated by the same RGB strip and 16.8 million colors, you can be sure that upHere’s GPU support will do no such thing. It is powered by a single 5 Volt 3-pin connector and is screwed in by 6 screws. Instead of a sliding screw, you have a sliding rubber pad which helps in not causing any damage to your GPU. The rubber pad keeps your GPU at bay while the brace holds its weight.

Do check to make sure your motherboard have the ARGB headers, if you are confused about that check out out detailed motherboard buying guide.

The upHere addressable RGB GPU brace also has support for most motherboards and its RGB lights can be synced with them, providing for not only ease of use but also simplicity in managing the RGB lights. It is easy to install however the 6 screws can be a little pain to deal with at first. Along with that it also fits rather well with RGB RAM etc due to how it looks.

Related Read: A round up of the new RTX 4090 options

3. MSI Gaming Graphics Card Bolster

Heavy-Duty Option

Pros

  • Vertical design
  • Support for 3 GPUs
  • Can fit in almost all motherboards

Cons

  • Can get in the way of other components or cable
  • Does not look very good

347 Reviews

Type: Vertical | RGB: No | Material: Steel and rubber

MSI is known for several products that they’ve successfully put out in the market. It makes sense that a company that’s responsible for putting out so many GPUs in the market would make a GPU support brace. After all, it’s only inevitable you get one seeing as how the latest GPUs are so heavy and big.

Unlike the previously mentioned support braces, this one is a vertical brace and has support for 3 GPUs. It has an adjustable pole that lets you install this bolster in motherboards of height from 390mm to 680mm, making it a great option for most motherboards. After vertically installing it, you can then adjust the rubber pads along the pole and they will support the weight of the GPU without letting the motherboard withstand the damage. There are no flashy features about this support brace and it is only there to do the essentials.

A GPU brace is good for preventing damage on the GPU,  a good motherboard is also essential. The Z690 is a good choice for Intel. Whereas, B550 and B450 are excellent AMD options.

Despite being a different design, this MSI bolster is as good a support brace for GPUs as any. Helping prevent the weight of the GPU to fall on the motherboard itself, it has support for 3 GPUs at the same time.

4. upHere Vertical Brace

Clever vertical solution

Pros

  • Easy installation
  • Magnetic base
  • Support for dual GPUs

Cons

  • Boring design
  • Can get in the way of the cables

2,147 Reviews

Type: Vertical | RGB: No | Material: Steel and rubber

We’ve already mentioned upHere’s support brace above but this one is a little different, albeit it does the same job. Instead of having horizontal support with RGB lights and flairs about it, this one is a vertical one with a simplistic design.

The base of this bolster is magnetic and it sticks to the base of your CPU case. With a vertical shape, it can help support up to 2 GPUs at the same time and essentially negate all of the weight that might be damaging your motherboard. It is made of aluminum allow and therefore, is a solid structure that can easily hold that heavyweight. The best part of this bolster is the fact that there are no screws needed to install it. With a magnetic base and just easy to move and adjust pads to hold the GPUs, you’re set and ready to go in a matter of minutes.

The upHere vertical GPU brace is a little different but it is no doubt a great investment. Not only is it not very expensive, but it also does its job exquisitely and holds two GPUs up at the same time without damaging or ruining your aesthetics. Furthermore, it is a plus if you are running a dual PC setup.

5. EZDIY-FAB GPU Holder

Cost-effective

Pros

  • Gets the job done
  • Inexpensive

Cons

  • Does not have a lot of structural integrity
  • Can't hold a lot of weight
  • Generic design

Type: Horizontal | RGB: No | Material: Aluminum

The final GPU support brace in our list is the EZDIY-FAB GPU Holder. This is a very simple looking brace that is easy on the wallet and can hold the weight of most of the GPUs. For those who just want a brace that can get the job done, look no further. If you do not have a very heavy GPU, this can be a really cost-effective and good option.

The EZDIY-FAB GPU holder has 3mm of aluminum on it which prevents your GPU from sagging and weighing down on your motherboard. These things can end up damaging the ports and at times, causing long-term damage to your GPU if left unaddressed. This brace is a horizontal one and does not really have a lot of weight and structural integrity to it. Therefore, it is best to use this GPU brace for medium weight graphics cards as most heavyweight ones will require more than this.

Related read: Best Budget Cases

The EZDIY-FAB GPU brace is an inexpensive holder for your GPU and just gets it all right. The matte-black look helps it blend in with most GPUs and does not stand out which can sometimes ruin the PC aesthetics. There isn’t much about this GPU brace, and you’ll be content with the purchase, provided your GPU does not weigh a lot.

ABOUT THE AUTHOR

Alyssa Arford


Alyssa Arford is an aspiring Electrical & Electronics Engineer with a vested interest in the innovation and design of computer hardware. Her passion for understanding the nitty gritty of how hardware components come together and playing around with the potential of silicon devices puts her in a position to confidently discuss emerging technologies and their implications in advanced computing.